Principle Of Room Thermostat

Many people have been used the room thermostat, but little known about the knowledge of room thermostat principle. The control lines in the room thermostat connected to the sub-tank, so that the size of water flow could be controlled. Every thermostat own a temperature sense probe, people set the temperature through this thermostat. Certainly there are some require for choosing the installing position. At first, not close to the door or window as far as possible. The position had better could represent the average temperature in the room. Generally speaking, both of the installing position and switches are side by side. We would like to choose one position which is far away from the door, so the temperature will be evenly.

While people installing the coil in a relatively large area of space,the ground must be set expansion joints. Because it needs to backfill with cement, sand, stone and other materials after the coil has been installed. So it could form storage layer. This layer will thermal expansion and contraction with the water temperature changed in the coil. Without the expansion joints, floor on the ground is easy to be broken and even cracking.

Joints usually installed perpendicular to the long side of the room. And the coil had better not through the joints. If there is any other choice, you could installation of hose at the coil.